 |
Parachute release kit comprising
- Cable
- Lever
- Chassis bracket
- Mounting and connecting hardware
|
 |
Lever end as installed in an ARRC customer car.
The lever has been anodised in this installation.
Click here
to go back to the top of the page. |
 |
Door latch and lock kit comprising
-
catches
-
strikers
-
door cover plates
-
mounting bolts
-
extension tabs for the lock levers
|
 |
Lock kit as installed in door, view from
outside and down from above through window glass opening.
No internal door handle mechanism fitted yet and
installation not finalised in these pictures. |
 |
Striker fitted through bodywork onto small
bracket welded to main loop of tubular frame chassis.
Click here
to go back to the top of the page. |
 |
Electric window regulators as fitted to luxury
super cars. Kit comes with
- pair of regulators, as seen
- switches, not shown
- wiring, not shown
|
 |
Seen here in correct orientation for door.
Window glass fits in silver coloured horizontal fitting which moves up and
down the plated guide. Adaptable
to most situations, please contact us if you wish to check dimensions.
Maximum lift, depending on installation, is 23 inches
The picture is pixellated to preserve the
anonymity of the model. Click
here to go back to the top
of the page. |
 |
Machined billet
6082-T6 aluminium Nitrous bottle mounts, suitable for 10 or 15 pound bottles. Shown
mounted on stainless display rails which are not included in the kit.
Mounts are at two different heights to hold
bottle at a suitable angle when mounted on a flat floor.
Clamps undo completely to allow easy
installation and removal of the bottle. |
 |
Shown here with sample bottle (not included in
the kit) installed. |
 |
This shows the rubber inserts which hold the
bottle firmly and allow for minor variations in size.
Click here
to go back to the top of the page. |
